|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NC7SVL04 -- TinyLogic(R) Low-ICCT Inverter September 2009 NC7SVL04 TinyLogic(R) Low-ICCT Inverter Features 0.9V to 3.6V VCC Supply Operation 3.6V Over-Voltage Tolerant I/Os at VCC from 0.9V to 3.6V Power-Off High Impedance Inputs and Outputs Proprietary Quiet SeriesTM Noise / EMI Reduction Circuitry Ultra-Small MicroPakTM Package Ultra-Low Dynamic Power Description The NC7SVL04 is a single inverter with a low-ICCT input design from Fairchild's Ultra-Low Power (ULP-A) series (R) of TinyLogic . The NC7SVL04 features very low quiescent current, even when the input voltage is lower than the VCC supply. This feature services mobile handset applications very well, allowing for direct interface with baseband processor general-purpose I/Os. Since mobile devices rely on a battery supply, the NC7SVL04 facilitates lower power consumption in mixed-voltage rail environments. This product is designed on an advanced CMOS technology for a wide low-voltage operating range (0.9V to 3.6V VCC), high drive needs (up to 24mA), and speed (maximum propagation delay of 3.5ns, VCC=3.3V). It achieves this performance while maintaining low CMOS power dissipation. Ordering Information Part Number NC7SVL04P5X NC7SVL04L6X NC7SVL04FHX Top Mark L04 CD CD Eco Status RoHS RoHS Green Package 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 6-Lead MicroPakTM, 1.00mm Wide 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch Packing Method 3000 Units on Tape & Reel 5000 Units on Tape & Reel 5000 Units on Tape & Reel For Fairchild's definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. (c) 2008 Fairchild Semiconductor Corporation NC7SVL04 * Rev. 1.0.3 www.fairchildsemi.com NC7SVL04 -- TinyLogic(R) Low-ICCT Inverter Connection Diagram IEEE/IEC Figure 1. Logic Symbol Pin Configurations Figure 2. SC70 (Top View) Figure 3. MicroPakTM (Top Through View) Pin Definitions Pin # SC70 1 2 3 4 5 Pin # MicroPak 1 2 3 4 6 5 Name NC A GND Y VCC NC Input Description No Connect Ground Output Supply Voltage No Connect Function Table Y=/A Inputs A L H H = HIGH Logic Level L = LOW Logic Level Output Y H L (c) 2008 Fairchild Semiconductor Corporation NC7SVL04 * Rev. 1.0.3 www.fairchildsemi.com 2 NC7SVL04 -- TinyLogic(R) Low-ICCT Inverter Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VIN VOUT IIK IOK IOH / IOL TSTG TJ TL PD Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current Parameter Min. -0.5 -0.5 Max. 4.6 4.6 VCC + 0.5 4.6 -50 -50 +50 50 50 Unit V V V mA mA mA mA C C C mW HIGH or LOW State VCC = 0V VIN < 0V VOUT < 0V VOUT > VCC (1) -0.5 -0.5 DC Output Source/Sink Current Storage Temperature Range Junction Temperature Under Bias Junction Lead Temperature, Soldering 10 Seconds SC70-5 Power Dissipation at +85C MicroPak-6 MicroPak2-6 -65 ICC or IGND DC VCC or Ground Current per Supply Pin +150 +150 +260 150 130 120 4000 2000 ESD Human Body Model, JEDEC:JESD22-A114 Charge Device Model, JEDEC:JESD22-C101 V Note: 1. IO absolute maximum ratings must be observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol VCC VIN VOUT Parameter Supply Voltage Input Voltage Output Voltage VCC = 0V Conditions Min. 0.9 0 0 0 Max. 3.6 3.6 3.6 VCC 24.0 18.0 6.0 4.0 2.0 0.1 Unit V V V HIGH or LOW State VCC = 3.0V to 3.6V VCC = 2.3V to 2.7V VCC = 1.65V to 1.95V VCC = 1.4V to 1.6V VCC = 1.1V to 1.3V VCC = 0.9V IOH/IOL Output Current in IOH/IOL mA TA t/V JA Operating Temperature, Free Air Minimum Input Edge Rate Thermal Resistance VIN = 0.8V to 2.0V, VCC = 3.0V SC70-5 MicroPak-6 MicroPak2-6 -40 +85 10 425 500 560 C ns/V C/W Note: 2. Unused inputs must be held HIGH or LOW. They may not float. (c) 2008 Fairchild Semiconductor Corporation NC7SVL04 * Rev. 1.0.3 www.fairchildsemi.com 3 NC7SVL04 -- TinyLogic(R) Low-ICCT Inverter DC Electrical Characteristics Symbol Parameter VCC 0.90 1.10 VCC 1.30 VIH HIGH Level Input Voltage 1.40 VCC 1.60 1.65 VCC 1.95 2.30 VCC 2.70 2.70 VCC 3.60 0.90 1.10 VCC 1.30 VIL LOW Level Input Voltage 1.40 VCC 1.60 1.65 VCC 1.95 2.30 VCC 2.70 2.70 VCC 3.60 0.90 1.10 VCC 1.30 1.40 VCC 1.60 1.65 VCC 1.95 2.30 VCC 2.70 2.70 VCC 3.60 1.10 VCC 1.30 IOH=-2mA VOH HIGH Level Output Voltage 1.40 VCC 1.60 IOH=-4mA 1.65 VCC 1.95 2.30 VCC 2.70 2.30 VCC 2.70 2.70 VCC 3.60 2.30 VCC 2.70 2.70 VCC 3.60 IOH=-6mA IOH=-100A VCC-0.10 VCC-0.10 VCC-0.20 VCC-0.20 VCC-0.20 VCC-0.20 .75 x VCC .75 x VCC 1.25 2.00 1.80 2.20 1.70 2.40 2.20 Conditions TA=25C Min. .65 x VCC .65 x VCC .65 x VCC 0.90 1.50 1.50 .25 x VCC .25 x VCC .25 x VCC .25 x VCC 0.70 0.80 TA=-40 to +85C Min. .65 x VCC .65 x VCC .65 x VCC .0.90 1.50 1.50 .25 x VCC .25 x VCC .25 x VCC .25 x VCC 0.70 0.80 VCC-0.10 VCC-0.10 VCC-0.20 VCC-0.20 VCC-0.20 VCC-0.20 .75 x VCC .75 x VCC 1.25 2.00 1.80 2.20 1.70 2.40 2.20 Max. Max. Units V V V IOH=-12mA IOH=-18mA 2.70 VCC 3.60 IOH=-24mA Continued on the following page... (c) 2008 Fairchild Semiconductor Corporation NC7SVL04 * Rev. 1.0.3 www.fairchildsemi.com 4 NC7SVL04 -- TinyLogic(R) Low-ICCT Inverter DC Electrical Characteristics (Continued) Symbol Parameter VCC 0.90 1.10 VCC 1.30 1.40 VCC 1.60 1.65 VCC 1.95 2.30 VCC 2.70 2.70 VCC 3.60 VOL LOW Level Output Voltage 1.10 VCC 1.30 IOL=2mA 1.40 VCC 1.60 IOL=4mA 1.65 VCC 1.95 IOL=6mA 2.30 VCC 2.70 2.70 VCC 3.60 2.30 VCC 2.70 2.70 VCC 3.60 IOL=12mA IOL=100A Conditions TA=25C Min. Max. 0.10 0.10 0.20 0.20 0.20 0.20 0.25 x VCC 0.25 x VCC 0.30 0.40 0.40 0.60 0.40 0.55 0.1 TA=-40 to 85C Min. Max. 0.10 0.10 0.20 0.20 0.20 0.20 0.25 x VCC 0.25 x VCC 0.30 0.40 0.40 0.60 0.40 0.55 0.5 Units V IOL=18mA 2.70 VCC 3.60 IOL=24mA IIN IOFF Input Leakage Current Power Off Leakage Current Quiescent Supply Current Increase in ICC per Input 0.90 to 3.60 0 VIN 3.60V 0 (VIN, VO) 3.60V VIN=VCC or GND VCC VIN 3.60V VIN=0.9V VIN=1.5V A 0 0.5 0.9 0.5 0.9 0.9 A ICC ICCT 0.90 to 3.60 1.95 3.60 A 6 6 8 8 A AC Electrical Characteristics Symbol Parameter VCC 0.90 1.10 VCC 1.30 tPHL, tPLH Propagation Delay 1.40 VCC 1.60 1.65 VCC 1.95 2.30 VCC 2.70 2.70 VCC 3.60 CIN CPD Input Capacitance Power Dissipation Capacitance 0 VIN=0V or VCC, f=10MHz CL=30pF, RL=500 Conditions CL=15pF, RL=1M CL=15pF, RL=2k TA=25C Min. 3.5 1.5 1.1 0.6 0.5 TA=-40 to 85C Max. 16.5 7.0 5.8 4.0 3.5 Typ. 34.0 8.1 3.7 2.8 2.0 1.5 3 Min. 3.0 1.5 1.0 0.6 0.5 Max. 27.8 7.5 6.3 4.5 4.0 Units Figure ns Figure 4 Figure 5 pF 0.90 to 3.60 5 pF (c) 2008 Fairchild Semiconductor Corporation NC7SVL04 * Rev. 1.0.3 www.fairchildsemi.com 5 NC7SVL04 -- TinyLogic(R) Low-ICCT Inverter AC Loadings and Waveforms Figure 4. AC Test Circuit Figure 5. AC Waveforms Symbol 3.3V 0.3V Vmi Vmo 1.5V 1.5V VCC 2.5V 0.2V VCC/2 VCC/2 1.8V 0.15V VCC/2 VCC/2 1.5V 0.1V VCC/2 VCC/2 1.2V 0.1V VCC/2 VCC/2 0.9V VCC/2 VCC/2 (c) 2008 Fairchild Semiconductor Corporation NC7SVL04 * Rev. 1.0.3 www.fairchildsemi.com 6 NC7SVL04 -- TinyLogic(R) Low-ICCT Inverter Physical Dimensions Figure 6. 5-Lead, SC70, EIAJ SC-88a, 1.25mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor's online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/analog/pdf/sc70-5_tr.pdf. Package Designator P5X Tape Section Leader (Start End) Carrier Trailer (Hub End) Cavity Number 125 (Typical) 3000 75 (Typical) Cavity Status Empty Filled Empty Cover Type Status Sealed Sealed Sealed www.fairchildsemi.com (c) 2008 Fairchild Semiconductor Corporation NC7SVL04 * Rev. 1.0.3 7 NC7SVL04 -- TinyLogic(R) Low-ICCT Inverter Physical Dimensions 2X 0.05 C 1.45 B 2X 0.05 C (1) 1.00 (0.49) 5X (0.75) (0.52) 1X (0.30) 6X RECOMMENED LAND PATTERN 0.05 C 0.45 0.35 TOP VIEW 0.55MAX A PIN 1 0.05 C 0.05 0.00 C 0.25 0.15 6X 0.10 0.05 0.35 5X 0.25 0.40 5X 0.30 (0.05) 6X 0.5 BOTTOM VIEW (0.13) 4X CBA C 0.10 0.00 6X DETAIL A 1.0 0.40 0.30 0.075 X 45 CHAMFER DETAIL A PIN 1 TERMINAL Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 MAC06AREVC Figure 7. 6-Lead, MicroPakTM, 1.0mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor's online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf. Package Designator L6X Tape Section Leader (Start End) Carrier Trailer (Hub End) Cavity Number 125 (Typical) 5000 75 (Typical) 8 Cavity Status Empty Filled Empty Cover Type Status Sealed Sealed Sealed www.fairchildsemi.com (c) 2008 Fairchild Semiconductor Corporation NC7SVL04 * Rev. 1.0.3 NC7SVL04 -- TinyLogic(R) Low-ICCT Inverter Physical Dimensions DETAIL A 5X Figure 8. 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor's online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf. Package Designator FHX Tape Section Leader (Start End) Carrier Trailer (Hub End) Cavity Number 125 (Typical) 5000 75 (Typical) Cavity Status Empty Filled Empty Cover Type Status Sealed Sealed Sealed www.fairchildsemi.com (c) 2008 Fairchild Semiconductor Corporation NC7SVL04 * Rev. 1.0.3 9 NC7SVL04 -- TinyLogic(R) Low-ICCT Inverter (c) 2008 Fairchild Semiconductor Corporation NC7SVL04 * Rev. 1.0.3 www.fairchildsemi.com 10 |
Price & Availability of NC7SVL04FHX |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |